An element designed to control phase switching using one output channel with a continuous current of up to 6A and a peak current of up to 8A. The element can be used for automated switching of lights, machines and production lines.
| Napájecí napětí | 110/230 V AC, 50/60 Hz |
|---|---|
| Klidový příkon | 0,5 W |
| Maximální spínaný proud | 8 A |
| Komunikační pásmo | 868 MHz |
| Vysílací výkon | 12 dBm |
| Rozsah provozních teplot | -10°C až 55°C |
| Stupeň krytí | IP40 |
| Rozměry | 82 x 82 x 28 mm |
An element designed for phase switching control using two output channels with a continuous current of up to 3 A per output and a peak current of up to 4 A per output. The element can be used for automated switching of lamps, machines and production lines.
Controllable extension lead for phase switching with a continuous current of up to 6 A and a peak current of up to 8 A. The element can be used for automated control of the connected end device without the need to intervene in the electrical installation.
| Napájecí napětí | 110/230 V AC, 50/60 Hz |
|---|---|
| Klidový příkon | 0,5 W |
| Maximální spínaný proud | 8 A |
| Komunikační pásmo | 868 MHz |
| Vysílací výkon | 12 dBm |
| Rozsah provozních teplot | -10°C až 55°C / -40°C až 65°C |
| Stupeň krytí | IP40 / IP54 |
| Rozměry | 82 x 82 x 28 mm |
| Délka přívodního kabelu | dle přání zákazníka |
An element intended for controlling lights with a DALI driver using one controllable non-addressable DALI output. Up to 64 DALI driver can be connected to each element. The element can be used for automated adjustment of the brightness intensity of the lamp in 10% increments.
An element intended for controlling lights with a DALI driver using two controllable non-addressable DALI outputs. Up to 32 DALI driver can be connected to each output. The individual channels can be connected virtually using the application to enable the control of biodynamic lighting.
An element intended for controlling lights with a DALI driver using four controllable non-addressable DALI outputs. Up to 16 DALI driver can be connected to each output. The individual channels can be connected virtually using the application to enable the control of biodynamic lighting.
An element designed to control lights with an analog driver 0 – 10 V or 1 – 10 V using one output. Up to 64 drivers can be connected to each element. The element can be used for automated adjustment of the brightness intensity of the lamp in 10% increments.
An element intended for sensing the light intensity in a room with a measurement range of 0 – 2,000 lux. The element can be used for automated control of the light intensity depending on the intensity level of the ambient lighting. In the case of lights without dimmable driver controlling their brightness, these lights can be switched on and off automatically.
| Napájecí napětí | 5 V DC |
|---|---|
| Klidový příkon | 0,5 W |
| Rozsah měření | 0 lx až 2040 lx |
| Přesnost měření | 10 % |
| Komunikační pásmo | 868 MHz |
| Vysílací výkon | 12 dBm |
| Rozsah provozních teplot | -10°C až 55°C |
| Stupeň krytí | IP40 |
| Rozměry | 82 x 82 x 28 mm |
Four-input button control module, which is located under the wall switch. The element can be placed under a classic wall switch, a halved wall switch or a four-button wall switch. Using this module, it is possible to control the lights and machines.
Control module containing five configurable button inputs. This module is supplied as electronics without protection. The element can be placed in a plastic box containing buttons and can be used to control lights and machines.
Control module containing fifteen configurable button inputs. This module is supplied as electronics without protection. The element can be placed in a plastic box containing buttons and can be used to control lights and machines.
Industrial control panel module containing five buttons with LED status indication. This is a mechanically resistant design intended for industrial halls and harsh environment.
| Napájecí napětí | 110/230 V AC, 50/60 Hz |
|---|---|
| Klidový příkon | 1 W |
| Počet tlačítek | 1 až 5 |
| Indikace stisku | LED signalizace |
| Komunikační pásmo | 868 MHz |
| Vysílací výkon | 12 dBm |
| Rozsah provozních teplot | -10°C až 55°C |
| Stupeň krytí | IP66 |
| Rozměry | 252 x 80 x 70 mm |
Five-inch control TFT display containing up to four virtual buttons in a modern design suitable for use in office spaces. This display can be used instead of a two-position wall switch.
| Napájecí napětí | 110/230 V AC, 50/60 Hz, 24 W PoE |
|---|---|
| Klidový příkon | 5 W |
| Komunikační rozhraní | Ethernet, WiFi |
| Uchycení | Pod povrch stěny |
| Rozsah provozních teplot | 0°C až 40°C |
| Úhlopříčka | 5“ (12,7 cm) |
Element intended for connecting the PIR sensor to the system. This element can be connected to the output of the PIR sensor and serves as a converter of information from the sensor to the application. In the application, it is possible to set a time delay without the need for direct intervention in the sensor.
A wireless communication gateway designed for communication between the server and the end wireless elements of the Savee solution. The communication gateway communicates in the LAN network using an Ethernet interface and it is powered by a passive PoE power supply. The communication gateway contains an integrated antenna.
| Napájecí napětí | 110/230 V AC, 50/60 Hz |
|---|---|
| Klidový příkon | 1 W |
| Komunikační rozhraní | Ethernet |
| Komunikační pásmo | 868 MHz |
| Vysílací výkon | 12 dBm |
| Rozsah provozních teplot | -10°C až 55°C |
| Stupeň krytí | IP40 |
| Rozměry | 50 x 54 x 36 mm |
A wireless communication gateway designed for communication between the server and the end wireless elements of the Savee solution. The communication gateway communicates in the LAN network using an Ethernet interface and is powered by passive PoE power supply. The communication gateway contains an SMA connector for connecting an external antenna.
Control touch screen designed for easy control of the system in the virtual plan of the building. The touch screen can be mounted on the wall in office spaces. The touch screen communicates in a LAN via Ethernet or Wi-Fi and is powered by passive PoE power supply.
| Napájecí napětí | 12 V DC, 24 W PoE |
|---|---|
| Klidový příkon | 20 W |
| Komunikační rozhraní | Ethernet, WiFi |
| Uchycení | Na zeď |
| Provedení | Antivandal |
| Operační systém | Android |
| Rozsah provozních teplot | 0°C až 45°C |
| Úhlopříčka | 10,1“ (25,6 cm) |
An industrial server with the Savee application installed in the building‘s local network. Together with the application, the server controls all connected elements of the system and ensures the execution of set automations and time schedules.
| Napájecí napětí | 110/230 V AC, 50/60 Hz |
|---|---|
| Klidový příkon | 50 W |
| Procesor | Intel Core i3 |
| RAM | 8 GB DDR3 |
| Úložiště | 120 GB HDD |
| Komunikační rozhraní | Ethernet |
| Operační systém | Linux |
| Přístup do aplikace | Webový prohlížeč |
An element designed to control phase switching using one output channel with a continuous current of up to 6 A and a peak current of up to 8 A. The element can be used for automated switching of lamps, machines and production lines. It is an outdoor version.
An element designed for phase switching control using two output channels with a continuous current of up to 3 A per output and a peak current of up to 4 A per output. The element can be used for automated switching of lamps, machines and production lines. It is an outdoor version.
Controllable extension lead for phase switching with a continuous current of up to 6 A and a peak current of up to 8 A. The element can be used for automated control of the connected end device without the need to intervene in the electrical installation. It is an outdoor version.
An element intended for controlling lights with a DALI driver using one controllable non-addressable DALI output. Up to 64 DALI drivers can be connected to each element. The element can be used for automated adjustment of the brightness intensity of the lamp in 10% increments. It is an outdoor version.
An element intended for controlling lights with a DALI driver using two controllable non-addressable DALI outputs. Up to 32 DALI drivers can be connected to each output. The individual channels can be connected virtually using the application to enable the control of biodynamic lighting. It is an outdoor version.
An element intended for controlling lights with a DALI driver using four controllable non-addressable DALI outputs. Up to 16 DALI drivers can be connected to each output. The individual channels can be connected virtually using the application to enable the control of biodynamic lighting. It is an outdoor version.
An element intended for controlling an outdoor light with a DALI driver and a Zhaga connector. The element is located in the Zhaga base and can be used for automated adjustment of the brightness intensity of the lamp in 10% increments.
An element intended for controlling an outdoor light with a DALI driver and a NEMA connector. The element is located in the NEMA base and can be used for automated adjustment of the brightness intensity of the lamp in 10% increments.
An element designed to control lights with an analog driver 0 – 10 V or 1 – 10 V using one output. Up to 64 DALI analog drivers can be connected to each element. The element can be used for automated adjustment of the brightness intensity of the lamp in 10% increments. It is an outdoor version.
An element intended for sensing the light intensity in an outdoor environment with a measurement range of 0 – 2,000 lux. The element can be used for automated control of the light intensity depending on the intensity level of the ambient lighting. In the case of lights dimmable driver controlling their brightness, these lights can be switched on and off automatically.
A wireless communication gateway designed for communication between the server and the end wireless elements of the Savee solution. The communication gateway communicates in the LAN network using an Ethernet interface and is powered by a passive PoE power supply. The communication gateway contains an integrated antenna and is designed for outdoor use.